Coriolis density meter supplier from China? The vortex flow meter is more commonly used in steam flowmeters now, with temperature and pressure compensation, and the measured result is mass flow. However, due to different environments, steam is divided into superheated steam and saturated steam. These are all possible changes in the density of steam, which will affect the measurement results. After the above-mentioned evaporation occurs, the former one has no effect on the compensation, only the dry part of the steam increases, and the dryness increases accordingly. The latter situation means that the saturated steam becomes superheated steam. At this time, the influence on the flow meter is divided into three types.
Influence of humidity on measurement results when using vortex meter. The output of the vortex flowmeter is only proportional to the flow velocity of the fluid flowing through the measuring tube. When measuring wet saturated steam, the influence of water droplets on the output of the turbine flow meter is negligible, so it can be considered that the output of the turbine flow meter is entirely caused by the wet flow. Caused by the dry part of the steam. The density of the dry part, whether it is pressure compensation or temperature compensation, can be detected more accurately. The results of steam measurement are often used as the basis for economic settlement between the supply and demand sides. If the two parties agree to settle the fee according to the dry part of the steam and no charge for the condensed water, the impact of the phase change on the measurement is negligible and can be ignored. Read additional information on https://www.bjssae.com/v-shape-coriolis-mass-flow-meter.html.
The Insertion Density Meters are equiped with the microprocessors inside, so the sensor could complete the signal conditioning, calculation and diagnosis functions, and it does not need the remote eletronic devices for processing. Typical industries applied include the petrochemical industiry, electricity power industry, wine industry, food industry, pharmaceutical industry, and mineral processing (such as, clay, carbonate, silicate, etc. ) For sepecific applications, the Insertion Density Meters are largely used in the interface detection of the multi-product production lines, density detection of the mixed liquid, end monitoring of the reaction kettle, and the separator interface detection.
After-sales service of gas turbine flowmeter: The use effect of gas turbine flowmeter largely depends on whether it is used reasonably. For new users, it is the supplier’s responsibility to provide technical guidance before the user installs. As for the products of international brands, they have occupied the market of major Chinese users for many years, and these major users have sufficient technical strength. For their scattered users, they basically rely on middlemen to do it. Problems brought about by after-sales service appear.
Turbine Flow Meter has the characteristics of high accuracy, good repeatability, convenient installation and maintenance, and simple structure. Liquid flows through the turbine casing, causing the internal rotor to rotate. When the rotor rotates, an electrical signal is generated in the pickup coil. This signal is converted to engineering units (liters, cubic meters, gallons, etc.) on the applicable local display. Optional accessory modules can be used to export signals to other devices. Make sure the vortex flow meter model meets your specific needs. For your future reference, if this information becomes unreadable on the turbine, it may be useful to record it on the nameplate of the manual. See the nameplate for your custom product specifications. Discover extra information on https://www.bjssae.com/.
Beijing Sincerity Automatic Equipment Co., Ltd was reformed from the Petrochemical Branch Automatic Equipment Co.,Ltd. Beijing Sincerity is the innovation developed enterprise invested by both the China Petroleum &Chemical Corporation’s Beijing Research Institute of Chemical Industries and the Capital Science and Technology Group. Please be noticed, that all the videos taken are approved by SGS, Switzerland, or TUV, Germany. All the videos are real and without shooting skills or beauty filters.