Categories
Industrial

Double surface planer supplier by v-holdmachinery.com

Double side planer manufacturer and supplier today: The most common application involves gluing a coating (veneer, laminate, composite, PVC etc) onto a substratum (MDF, hardboard, plywood, hollow panels, blockwood etc). The basic configuration of the pressing line is comprised of a feed belt, an automatic press and a discharge deck. This configuration can be completed with numerous options, such as glue spreaders, polishers, automatic feeders, disk, roller or belt conveyors, automatic assembling stations, panel turners and stackers. Lines with various degrees of automation can be supplied right up to fully automatic lines that do not require direct intervention by the operator. Read even more details on https://www.v-holdmachinery.com/double-side-planner.

The radial arm saw is pretty much a portable circular saw that glides on an adjustable arm suspended over a fixed cutting surface. The blade and motor are connected to the arm by a yoke, which is adjustable along both horizontal and vertical planes, enabling the saw to be swung in a variety of directions. For cross-cut work, position the board flush with the fence at the rear of the saw and draw the blade across the wood. The bevel lock allows the saw to be tilted for cutting angles. You can set it to the desired angle using the protractor on the saw housing. The saw can be swivelled right or left for mitring, or turned a full 90 degrees for ripping. The blade can also be raised or lowered using a crank. The size of the saw is determined by the dimension of the blade the saw can accommodate. As an example a model using a 10 inch blade would be able to cut work-pieces up to 3 inches thick.

Composite presses deal with composite materials that need to be shaped into a usable product. The automotive trade use them to shape carbon fibre panels and battery boxes for electric cars. The aero space industry use them for shaping light weight panels and seat covers. The military use them to create bullet proof floor pans for military vehicles. The refrigeration industry use them to create cold storage insulation panels for fridges. The job of a laminate press is to bond layered materials together to create a stronger material than the original, and also for cosmetic purposes. Many laminating processes involve coating a film, plastic, metal, wood, or other substrate with a surface to strengthen it to be used for a much broader range of purposes.

The jig saw, which is also known as a scroll saw, is used for making intricate and irregular cuts on small jobs. On thin wooden pieces, jig saw can cut in a curvilinear path. These woodworking machines are actually a type of band saw of much smaller size and specially adapted to irregular work. It consists of a base, frame, table, upper and lower chucks, guide assembly, and blade. Chucks hold the blade with its teeth pointing downward. The blade resembles a hand hacksaw blade in regard to its shape. The blade reciprocates vertically up and down and shapes the wood. The table of the jig saw can be tilted for angular work. The special feature of the saw is that it can be used to cut inside curves. A jig saw is specified by its blade-to-arm distance.

In practice, the workpiece is either clamped between two centers or on a face plate. Long jobs are held between the centers and turned with the help of gouge, skew chisel, parting tool, etc. Generally, the lathe is supplied together with a number of accessories for making it useful for a variety of jobs. The size of lathe woodworking machines, as in the engine lathe, is usually specified in terms of the so-called “swing” of the lathe and the maximum distance between centers.

Brushing machines are used as a labour saving tool to clean wood before other work is carried out, such as, gluing wood panels. Cramps and presses are used to assemble the wooden pieces that make up window, door or other types of frames. Dust extraction when working with wood is very important for the health of your lungs. There are several solutions, either large machines that draw the dust away. Or small bags that fit directly to the machine which sucks the sawdust straight into it, helping to cut down the amount of dust in the air. Read extra details at https://www.v-holdmachinery.com/.

M521GH High Speed Moukder has superior material delivery system. The highest feeding speed can up to 60m/min with automatic feeding system. Professional solution for planning large amount of wood material. This machine can largely reduce processing time of wood, it improve efficiency and help reduce labour cost. The side feeding mechanism which is installed in in-feed table can ensure the wood material to be fed continuously in high speed. Equipped with gear case for short material to achieve continuously feeding and smooth cutting.