Categories
Manufacturing

Excellent double planer machine manufacturer and supplier

Double side planer factory by V-hold Machinery: Presses come in various sizes and with various powers/pressures. The presses can be easily adapted to fit a businesses personal requirements. Automated press lines are designed in conjunction with all through-feed press options to be fully automatic or semi-automatic. They can start at the brushing stage where the material is cleaned, through to gluing, pressing then cutting. Modern presses fall into two categories: down-acting and up-acting. A down-acting machine has an upper beam that moves downwards to bring the tooling together. An up-acting machine has a lower beam that moves upwards to do the same. Each machine has its own strengths and limitations. Find extra information at https://www.v-holdmachinery.com/double-side-planner.

Cross cut saws are perfect when you need to cut across the grain. There are two choices, a blade above the table coming across the wood, or a blade underneath that comes up through the table. The cross saw with the blade underneath the table keeps the blade at a greater distance from the user so is considered safer. It can also be automated with an automatic feed system which allows you to safely cut multiple pieces in one go, which can be more efficient. Jigsaws are best for cutting tight curves, angles and intricate shapes. Blades for jigsaws are short and straight. They’re clamped at the top and bottom and cut in a reciprocating up and down motion.

Up-acting machines can limit staged bending because of the possibility of ram tilt, staged bending may not be a viable option on an up-acting machine. Because staged bending utilises multiple stations on one machine, if any of the stations on an up-acting machine are too far from the centre, ram tilt may result. Hydraulic presses come in many different forms and are used in many different industries. The basic structure to all presses is a heavy-duty main frame with hydraulic cylinders. The number of cylinders are dependent on the pressure requirement. They are operated by a hydraulic power pack. The presses can be manufactured with heated or cold platens and can have conveyors fitted to make the presses automated.

A mortise is a square slot cut in the direction of depth for the purpose of making a mortise and tenon joint in a wooden piece. The mortising woodworking machines are used for cutting mortise and tenon joints which are very laborious and time consuming operations. There are three types of mortisers, namely (1) hollow chisel mortiser (2) chain mortiser and (3) oscillating bit mortiser. The hollow chisel mortiser, the most commonly used woodworking machines, consists of a revolving spindle carrying an auger bit at the bottom end. The auger bit rotates at a high speed inside a hollow chisel of square section. When the chisel is forced into the wood, the bit bores a square hole by the sharp end of the chisel, the auger bit and chisel thus work together and perform boring of a square hole. The depth of the mortise is regulated by means of an adjustable depth stop. The spindle is rotated by an electric motor, and tool-feed is obtained by pressing foot-lever.

The band is available in two models, vertical and horizontal. In the former, two wheels are arranged side by side and the table is mounted underneath. In the latter model, Frame illustrated in Fig. 10.55, the wheels are arranged one above the other in a vertical plane below the table and the band passes through the table. As in the case of the circular table, angular cuts are obtained by tilting the saw table. The size of the band saw is specified as the distance from the saw band to the inner side of the frame. The distance is roughly equal to the diameter of the wheels.

The wood is fixed between the headstock and tailstock of the lathe. The headstock houses the motor that spins the work-piece. The tailstock is adjustable, moving along the length of the bed to fit work-pieces of various lengths. Once the work-piece is locked in place, the tool rest is set into position. The spinning work-piece is then shaped using a chisel or gouge held fast to the tool rest. Face-plate turning, in with the work-piece is fastened with screws to the face plate of the drive spindle, allows the woodworker to produce bowls and other hollow goods. See more information on https://www.v-holdmachinery.com/.

M521GH High Speed Moukder has superior material delivery system. The highest feeding speed can up to 60m/min with automatic feeding system. Professional solution for planning large amount of wood material. This machine can largely reduce processing time of wood, it improve efficiency and help reduce labour cost. The side feeding mechanism which is installed in in-feed table can ensure the wood material to be fed continuously in high speed. Equipped with gear case for short material to achieve continuously feeding and smooth cutting.